Skip to main content

Where were the world's first computer animations produced?

Part of one floor of the Atlas installation
(courtesy Rutherford Appleton Laboratory and
the Science and Technology Facilities Council (STFC))
We are all so used to CGI that it's not even a surprise these days when the effects on Dr Who are passable. But 50 years ago, things were very different. Usually the only computer animation you could expect was watching the punched tape or cards fly through the reader. But where was the first seed planted for the future wonders of CGI that would make practically any modern science fiction or action film possible? Was it MIT? Hollywood? No, it was Oxfordshire. In the wonderful Rutherford Appleton Laboratory.

Let me hand you over to Marion at the Science & Technology Facilities Council (based in sunny Swindon):

UK computing is today celebrating fifty years since the launch of what was at that time the largest supercomputer in the world, the Atlas 1. When built it was the size of a large detached house.  Now that same computing capacity would fit in your pocket inside your mobile phone.

In 1964, the Rutherford Appleton Laboratory (RAL) in Oxfordshire opened the UK’s first purpose-built computer laboratory to house one of the world’s first supercomputers.   Not only did this facility go on to produce the world’s first computer animated films during the mid-seventies it also contributed the 3D wire-frame model  shown on the navigation monitors in the landing sequence of the Ridley Scott film ‘Alien’ – making it the Industrial Light and Magic or Weta computer animation facility of its day.

The Ferranti Atlas 1 computer was the largest of three world leading computers built in the UK.  It cost around £3M – equivalent to about £80M in today’s currency – and was so enormous the Atlas Computer Laboratory, as it was known then, was built to fit the computer.

This week, on 13 – 14 November, the Science and Technology Facilities Council (STFC) is opening RAL’s doors to celebrate those 50 years of supercomputing, with a series of talks, tours and exhibits to highlight the importance of this computer facility to society today.

 In the 1960s and 70s, universities and other research establishments  that needed to use computing facilities had to put their program and data onto punch cards and post them to the Atlas Computing Laboratory, where their program would  be run for them.

Dr Andrew Taylor, Executive Director, STFC National Laboratories, said, “Since those early days, computing at RAL has gone from strength to strength, and the Atlas Centre is now home to Tier One – where data from the Large Hadron Collider is stored in the UK, as well as a range of other facilities such those which process data from weather satellites. Fifty years on, the technology is so far advanced that a mobile phone is more powerful and far cheaper than the Atlas computer.”

The Atlas processor used more than 5,600 circuit boards, which would have covered an area about the size of a tennis court – around 90,000 times bigger than a modern computer chip.  One of its discs could hold just two photographs, whereas today’s equivalent, the USB stick, can store thousands of images.

The original Atlas Computer Laboratory established a national computing operation to support scientific research.  Since 1964 that UK computing operation has been a part of many technical and scientific innovations. It has contributed to the governance of the World Wide Web; it has managed the data which led to the discovery of the Higgs boson, and it continues to support major scientific experiments at facilities in the UK and internationally.

The world's first computer animations were produced at the laboratory. These included an animated model of stress-loading across an M6 motorway bridge that was being built at the time.  It was the first entirely computer-produced engineering film to be made in the UK and won the Great Britain entry in the 1976 international Technical Films Competition in Moscow. Most famously, the laboratory's facilities were used to produce the 3D wire-frame model  shown on the navigation monitors in the landing sequence of the Ridley Scott film ‘Alien’, which won the 1979 Academy Award for best visual effects.

People touring the Atlas Centre exhibits during these 50th Anniversary celebrations will discover the rich history of computing innovations at RAL, from the very beginning of supercomputers to the endless possibilities of today.

Dr Taylor added, “We are particularly excited that, in its 50th anniversary year, we are able to display the console from the original Atlas computer, together with memorabilia of the time.”

Though the Atlas computing operation has gone from strength to strength the Ferranti Atlas 1 itself closed in March 1973 and was replaced by an ICT1906A. In the eight years of operation it had run for 44,500 hours with a 97% up time. 836,000 jobs were run, 300 million cards read, 4000 million characters from paper tape read, 800 million lines of line-printer output generated and 17 million cards punched.

You can read more about Atlas at its website. Here are those groundbreaking wireframe graphics in a clip from Alien, but it French to make it more noir:

Comments

Popular posts from this blog

Why I hate opera

If I'm honest, the title of this post is an exaggeration to make a point. I don't really hate opera. There are a couple of operas - notably Monteverdi's Incoranazione di Poppea and Purcell's Dido & Aeneas - that I quite like. But what I do find truly sickening is the reverence with which opera is treated, as if it were some particularly great art form. Nowhere was this more obvious than in ITV's recent gut-wrenchingly awful series Pop Star to Opera Star , where the likes of Alan Tichmarsh treated the real opera singers as if they were fragile pieces on Antiques Roadshow, and the music as if it were a gift of the gods. In my opinion - and I know not everyone agrees - opera is: Mediocre music Melodramatic plots Amateurishly hammy acting A forced and unpleasant singing style Ridiculously over-supported by public funds I won't even bother to go into any detail on the plots and the acting - this is just self-evident. But the other aspects need some ex

Is 5x3 the same as 3x5?

The Internet has gone mildly bonkers over a child in America who was marked down in a test because when asked to work out 5x3 by repeated addition he/she used 5+5+5 instead of 3+3+3+3+3. Those who support the teacher say that 5x3 means 'five lots of 3' where the complainants say that 'times' is commutative (reversible) so the distinction is meaningless as 5x3 and 3x5 are indistinguishable. It's certainly true that not all mathematical operations are commutative. I think we are all comfortable that 5-3 is not the same as 3-5.  However. This not true of multiplication (of numbers). And so if there is to be any distinction, it has to be in the use of English to interpret the 'x' sign. Unfortunately, even here there is no logical way of coming up with a definitive answer. I suspect most primary school teachers would expands 'times' as 'lots of' as mentioned above. So we get 5 x 3 as '5 lots of 3'. Unfortunately that only wor

Which idiot came up with percentage-based gradient signs

Rant warning: the contents of this post could sound like something produced by UKIP. I wish to make it clear that I do not in any way support or endorse that political party. In fact it gives me the creeps. Once upon a time, the signs for a steep hill on British roads displayed the gradient in a simple, easy-to-understand form. If the hill went up, say, one yard for every three yards forward it said '1 in 3'. Then some bureaucrat came along and decided that it would be a good idea to state the slope as a percentage. So now the sign for (say) a 1 in 10 slope says 10% (I think). That 'I think' is because the percentage-based slope is so unnatural. There are two ways we conventionally measure slopes. Either on X/Y coordiates (as in 1 in 4) or using degrees - say at a 15° angle. We don't measure them in percentages. It's easy to visualize a 1 in 3 slope, or a 30 degree angle. Much less obvious what a 33.333 recurring percent slope is. And what's a 100% slope